|SKU: ET2265-BW

Haldex Gen 3 AWD Pump Kit Jaguar Land Rover LR003147 6G9N-4C019-AA

Name: Haldex Gen 3 AWD Pump Kit Jaguar Land Rover LR003147 6G9N-4C019-AA
Brand: BorgWarner
SKU: ET2265-BW
Price: 288.77 GBP
Availability: InStock

£288.77 GBP (Inc VAT)

Ex VAT: £240.64

Tax included Shipping calculated at checkout.

✓ In stock at our Arlesey workshop

Order before 2pm on a working day and this is picked and dispatched the same day by express courier, normally with you in 1–2 working days.

Collection from Arlesey also available — choose it at checkout.

Fitting service

Get it installed

Visit our workshop and have it fitted by our own transmission specialists.

Book now

Others often need these

6DCT450 MPS6 Auto Powershift Clutch Positioning Ring for Ford, Volvo

Regular price £21.08 GBP (Inc VAT)

Ex VAT: £17.57
Corteco Differential Shaft Seal 01025620B 44x67x10/15.5mm

Regular price £19.47 GBP (Inc VAT)

Ex VAT: £16.23
Gen 4 Haldex Pump for Rear Diff Ford Volvo Land Rover

Regular price £273.65 GBP (Inc VAT)

Ex VAT: £228.04
Gen 4 Haldex Pump for Rear Diff Ford Volvo Land Rover - Genuine Haldex (S-TEC)

Regular price £325.22 GBP (Inc VAT)

Ex VAT: £271.02

Browse related

Delivery and Shipping

UK delivery — parts we hold in stock

Ordered before 2pm on a working day, these are dispatched the same day by express courier and normally arrive within 1–2 working days.

Parts supplied from our European supplier

A large part of our range is held by our supplier in Germany rather than on our own shelves. We order these in for you as soon as you place the order. They normally dispatch within 7–10 working days, and are then sent on by express courier like anything else. Nothing ships to you direct from Germany — it comes to our Arlesey workshop first, so you deal only with us for returns and warranty.

Collection from Arlesey

Click and collect is available on parts we physically hold. If an item has to come in from our supplier it cannot be collected, and checkout will tell you so before you pay.

International

3–5 working days once dispatched. Any customs charges or excise duties are the responsibility of the buyer.

View our Shipping Policy

*Delivery times are estimates and can be affected by factors outside our control.

Subscribe Here

Haldex Gen 3 AWD Pump Kit — Jaguar / Land Rover — LR003147 / 6G9N-4C019-AA / DS118589

The BorgWarner DS118589 is the Generation 3 pre-charge pump kit for the Haldex AWD rear axle system fitted to Jaguar and Land Rover vehicles. The Haldex pump is the most commonly replaced component in the AWD system, typically failing due to lack of servicing or oil contamination. This kit contains the genuine pump assembly with all required hardware.

Parts Included

Haldex Generation 3 pre-charge pump
Fittings and seals (as supplied by BorgWarner)

Part Numbers

BorgWarner: DS118589
Jaguar: 6G9N-4C019-AA / LR003147

Vehicle Compatibility

Land Rover Freelander equipped with the Generation 3 Haldex rear differential AWD system.

This listing is the BorgWarner-supplied unit — a brand new genuine part. We also stock the S-TEC version under ET2265-ST.

Frequently Asked Questions

What symptoms indicate a failing Haldex Gen 3 pump on a Freelander?

Loss of rear-wheel drive engagement, the AWD warning light illuminating, sluggish acceleration on loose surfaces, and stored Haldex fault codes are common indicators. The pump should be replaced promptly to prevent secondary damage to the Haldex unit.

Is DS118589 the correct pump for Jaguar as well as Land Rover?

Yes. The 6G9N-4C019-AA is the Jaguar/Land Rover OEM reference and DS118589 is the BorgWarner equivalent. Both refer to the same Generation 3 pump used across these platforms.

Should I replace the Haldex oil and filter at the same time?

Yes, always. Contaminated Haldex oil is a primary cause of pump failure. A fresh oil and filter service at the same time as the pump replacement maximises the service life of the new unit.

How is the Haldex pump accessed on the Freelander?

The Haldex pump on the Freelander is located at the rear differential unit. Access requires raising the vehicle safely and removing the undertray. Full Haldex unit removal is not needed for a pump replacement in most cases.

Do I need to code or calibrate anything after fitting the new pump?

No coding is required for the pump, as it is a mechanical component. However, a Haldex system reset or adaptation via Land Rover IDS or equivalent diagnostic tool is recommended after fitting.

Why Choose Eco Torque?

As specialists in gearbox rebuilds and repairs, Eco Torque takes pride in offering genuine gearbox parts, high-quality aftermarket alternatives and competitive pricing.

Need Help Finding the Right Part?

If you are unsure whether this part is compatible with your vehicle, send us your UK registration number or VIN and we will help you find the correct part.