Haldex Gen 3 AWD Pump Kit Jaguar Land Rover LR003147 6G9N-4C019-AA

Haldex Gen 3 AWD Pump Kit — Jaguar / Land Rover — LR003147 / 6G9N-4C019-AA / DS118589

The BorgWarner DS118589 is the Generation 3 pre-charge pump kit for the Haldex AWD rear axle system fitted to Jaguar and Land Rover vehicles. The Haldex pump is the most commonly replaced component in the AWD system, typically failing due to lack of servicing or oil contamination. This kit contains the genuine pump assembly with all required hardware.

Parts Included

• Haldex Generation 3 pre-charge pump
• Fittings and seals (as supplied by BorgWarner)

Part Numbers

BorgWarner: DS118589
Jaguar: 6G9N-4C019-AA / LR003147

Vehicle Compatibility

Land Rover Freelander equipped with the Generation 3 Haldex rear differential AWD system.

Note: due to crossover OE suppliers on Haldex parts, you may receive items in a BorgWarner or S-Tec box. Both are brand new genuine parts.

Frequently Asked Questions

What symptoms indicate a failing Haldex Gen 3 pump on a Freelander?

Loss of rear-wheel drive engagement, the AWD warning light illuminating, sluggish acceleration on loose surfaces, and stored Haldex fault codes are common indicators. The pump should be replaced promptly to prevent secondary damage to the Haldex unit.

Is DS118589 the correct pump for Jaguar as well as Land Rover?

Yes. The 6G9N-4C019-AA is the Jaguar/Land Rover OEM reference and DS118589 is the BorgWarner equivalent. Both refer to the same Generation 3 pump used across these platforms.

Should I replace the Haldex oil and filter at the same time?

Yes, always. Contaminated Haldex oil is a primary cause of pump failure. A fresh oil and filter service at the same time as the pump replacement maximises the service life of the new unit.

How is the Haldex pump accessed on the Freelander?

The Haldex pump on the Freelander is located at the rear differential unit. Access requires raising the vehicle safely and removing the undertray. Full Haldex unit removal is not needed for a pump replacement in most cases.

Do I need to code or calibrate anything after fitting the new pump?

No coding is required for the pump, as it is a mechanical component. However, a Haldex system reset or adaptation via Land Rover IDS or equivalent diagnostic tool is recommended after fitting.

Why Choose Eco Torque?

As specialists in gearbox rebuilds and repairs, Eco Torque takes pride in offering genuine gearbox parts, high-quality aftermarket alternatives and competitive pricing.

Need Help Finding the Right Part?

If you are unsure whether this part is compatible with your vehicle, send us your UK registration number or VIN and we will help you find the correct part.

Reference Number: ET2265