Ravenol ATF 6HP Fully Synthetic Automatic Transmission Fluid 7L

Ravenol ATF 6HP Fully Synthetic Automatic Transmission Fluid – 7 Litres

RAVENOL ATF 6HP is a fully synthetic automatic transmission fluid formulated from hydrocracked base oils and PAO synthetics with premium additive packages. It is developed specifically for ZF 6HP-series automatic transmissions and provides smooth, reliable operation in high-performance gearboxes. Regular transmission oil changes using the correct specification prevent jerky gear changes, dashboard warning messages, and premature gearbox failure.

Kit contains:

• x3 — 1L of RAVENOL ATF 6HP Transmission Fluid
• x1 — 4L of RAVENOL ATF 6HP Transmission Fluid

Fits transmissions: ZF 6HP19, 6HP21, 6HP26, 6HP28, 6HP32, 6HP34; also 5HP-series

OEM approvals / specifications met:
BMW 83220144137 · BMW 83220142516 · BMW 83222305396 (ATF2)
Ford MERCON SP XT-6-QSP (6R60, 6R75, 6R80) · Ford WSSM2C919-D
Jaguar C2C 8432 · Land Rover TYK500050
VW/Audi G 055 005 A1/A2/A6 · ZF S671 090 252/253/255 · ATF M 1375.4

Features & Benefits:

• Excellent low-temperature flow for reliable cold starts
• High, stable viscosity index across a wide temperature range
• Very low pour point
• Outstanding protection against corrosion and foam
• Balanced friction coefficient for smooth clutch engagement
• Compatible with all seal and gasket materials
• High thermal and oxidation stability for extended service life
• Excellent cooling performance and shear stability
• Lowest evaporation losses
• Compatible with non-ferrous components

How often should I change the ATF 6HP fluid?

ZF recommends changing the ATF in 6HP transmissions approximately every 60,000 miles or as part of a major service interval. Vehicles used for towing, frequent short trips, or spirited driving should be serviced more frequently. Ravenol ATF 6HP meets the full ZF factory specification.

What transmissions does Ravenol ATF 6HP cover?

Ravenol ATF 6HP was developed for the ZF 6HP-series 6-speed automatic transmissions — 6HP19, 6HP21, 6HP26, 6HP28, 6HP32, and 6HP34 — and also covers the earlier ZF 5HP-series. These transmissions are used in BMW, Audi, VW, Jaguar, Land Rover, Ford, and many other vehicles.

How much fluid does a 6HP transmission typically hold?

Capacity varies by vehicle and service type. A full drain and refill typically requires 7–9 litres; a partial service (sump pan and filter only) may use 4–5 litres. Refer to your vehicle's service manual or contact Eco Torque with your registration number for specific guidance.

Is this 7L kit enough for a full transmission service?

For most 6HP applications a 7L kit is sufficient for a full drain and refill. For vehicles with larger capacity or extended sump pans, or where the torque converter is also drained, an additional litre may be required.

Can I mix Ravenol ATF 6HP with the OE fluid or another ATF brand?

Mixing transmission fluids is not recommended. Always flush out as much old fluid as possible and refill with fresh Ravenol ATF 6HP to ensure the additive package works as intended and to protect seals and friction materials.

Why Choose Eco Torque?

As specialists in gearbox rebuilds and repairs, Eco Torque takes pride in offering genuine gearbox parts, high-quality aftermarket alternatives and competitive pricing.

Need Help Finding the Right Part?

If you are unsure whether this part is compatible with your vehicle, send us your UK registration number or VIN and we will help you find the correct part.

Reference Number: ETB3447